“Pump Covers” has been added to your cart.
-
- General Pumps, Pressure Pumps
HCM Series
- Horizontal multistage centrifugal pumps designed for pressurizing household water supply – where higher pressures are required. Available in 3 sizes makes choosing the right pump for a reliable water supply easy Available as dual pump sets also
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Multistage Pressure Pumps, Submersible Pumps
HSM Series
- 4” and 6" Multistage submersible pressure pumps with built-in integrated electronics, designed to automatically start and stop the pump. Available in Single Phase only Grundfos and Davey brands also available
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Tanks, Water Tanks
Modular Tank System
- PE Modular Rainwater Tank System designed for collection of rainwater in urban areas Tanks can be added to as required (No limit to number of tanks)
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Hose &Fittings
Stainless Steel Clips & Clamps
- Non-perforated S/S hose clips to suit hose diameters from 6mm up to 140mm S/S 51 Hose Clamps to suit hose diameters from 79mm up to 240mm Designed for general/multi-purpose hose applications in conjunction with pumps & associated equipment
- Add to cart
-
- Accessories/ Filters, Pump Station - Tank Accessories
Uniseals
- Rubber compression seals, especially designed for fitting of pipework into polyethylene tanks and chambers Eg Pumping stations Unique lip ensures a high integrity seal Easy to Install – you only require the right size holesaw and drill Accommodates tank wall thickness up to 15mm Provides a flexible, water tight seal in tanks Standard sizes to suit pipe from 10mm up…
- Add to cart
-
- Drainage Pumps, Submersible Pumps
A Series
- Robust, heavy duty submersible pumps for clean or dirty water applications Either manual or automatic models available (See specs) Single & Three phase options available (See specs)
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Submersible Pumps, Vortex Pumps
AF Series
- Robust, heavy duty submersible vortex pumps for solids handling applications Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Multistage Pressure Pumps, Submersible Pumps
BIA Series
- 6” Multistage submersible pressure pump with Float Switch for situations where high pressure is required For pumping of slightly dirty water/effluent Available in single phase only Davey and Grundfos brands available also
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Pump Station Lids
Cast Iron Lid/Frame
- DRC66AB AB Rated – 53kN Light Duty Traffic Rated DRC66CD CD Rated – 140kN Heavy Duty Traffic Rated
- Select options This product has multiple variants. The options may be chosen on the product page
-
- General Pumps, Portable Pumps
Diaphragm Sludge
- Ideal pumps for pumping muddy water containing sand and sludge etc
- Add to cart
-
- General Pumps, Pressure Pumps
DPBS Series
- Dual Pump Packaged Water Booster Pump Sets designed for more demanding applications Fully automatic operation
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Pump Station - Tank Accessories
PE Extension Risers
- PE Extension Riser (EXR) / Valve Box (VBX) designed for above or below ground applications The single riser fits the Mini, 1000, 1500 or 2000 Litre Pump Stations. The dual riser fits the 3000 and 4000 Litre pump stations Designed if extra depth required, or as a separate valve chamber
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Pump & Plumbing Accessories
Pump Covers
- Polyethylene vented pump cover Stainless steel Screws provided Universal – fits most pump types Versatile – easy to Install Provides shelter & protection for pump Available in range of different colours 2 sizes available:- Small 500 x 400 x 700 (PC) Large 850 x 570 x 800 (PCL)
- Add to cart
-
- Accessories/ Filters, Valves
PVC Swing Check Valves
- PVC Full Flow Swing Check Valve for dirty water applications with small solids Glued socket ends for quick installation Available with spring or swing check valve Ideally suited to a wide range of applications Standard Sizes from 15mm to 150mm
- Add to cart
-
- Pump Stations, Sewage Pump Stations
Sanimat – Abs
- Above-ground compact self-contained sanitary pumpout units for pumping of either raw sewage/greywater Units are either installed in recess/cavity or basement below the level of the fixtures Especially designed for tight spaces where holding tanks are not feasible Single or Dual pump options available in both single and three phase ABS, Grundfos, Sanimaster brands available Code 1000 Series Tank = 70 Litre Capacity 1002 Series…
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Greywater Pump Stations, Pump Stations
Undersink
- Medium sized self contained above-ground wastewater pump out unit, for situations where gravity is not feasible Units are usually installed below sink or basin unit to accept gravity waste pipe inlets NB: Separate carbon vent available if required, otherwise units require venting. Hunter valves are not suitable. Tank size: 510mm L x 410mm W x 475mm H Tank capacity: 90…
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Multistage Pressure Pumps, Submersible Pumps
D42 / D53 Series
- Multistage submersible drainage pumps c/w 2 or 3 impeller designs for higher head pressures Either manual or automatic models available
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Valves
Double Union Ball Valves PVC
- PVC Double Union Full Flow Ball Valve Incorporates Safe Block design and includes fully adjustable removable seats Designed for water, effluent, and sewage applications Balls are made from PE – PTFE Technopolymer, EPDM O-Rings, PVC Valve Body Either BSP or Socket Ends Available Standard Sizes from 15mm to 100mm
- Add to cart
-
- Pump Stations, Sewage Pump Stations
Drainbox
- Compact above-ground fully automatic single pump stations designed for pumping sewage and wastewater for smaller sanitary applications in situations where gravity discharge is not feasible There are 4 different pump types available to suit different site conditions & applications Dual pump options also available
- Read more
-
- Accessories/ Filters, Pump Station Lids
Galvanised Web Grating
- GWG-A Pedestrian Rated (Class A) GWG-B Pedestrian Rated (Class B) - Includes Frame GWG-C Heavy Duty Rated (Class C) - Includes Frame
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Accessories/ Filters, Pump Station - Tank Accessories
Odour Filters
- Vent Odour Filters are designed to remove foul odours, noxious and corrosive gases from vent pipes (including hydrogen sulfide) They are designed to fit sewer vent pipes
- Select options This product has multiple variants. The options may be chosen on the product page
-
- General Pumps, Portable Pumps
Poly Pumps
- For pumping corrosive liquids such as liquid fertiliser, salt water, and chemicals
- Add to cart
-
- Accessories/ Filters, Hose &Fittings
Stainless Steel Strainer
- S/S Strainer c/w Male BSP Thread Designed to screw into BSP Female Non-Return Valves Designed for underwater fixed pipework applications e.g. Pressure Pumps Standard Sizes from 10mm up to 100mm
- Add to cart
-
- Accessories/ Filters, Pump & Plumbing Accessories
Valve Boxes
- Robust Polyethylene Construction Valve Boxes (VB) or as complete Boundary Kits (BK) Designed to withstand light vehicle traffic loads U.V. Resistant, High Impact, HDPE Lid secured to body by galvanized chain c/w 316 s/s bolts Lids available in different colours Suitable as Boundary Kits for Sewer Pump/Pressure Systems c/w Isolating Valve, NRV and Tee Junction
- Add to cart
