In-Ground Vertical Pump Chambers are designed for sewage and stormwater applications in either retrofit, replacement or new tank installations NB: These tanks include flat base for pumps, but exclude the pumps, pipework and valves.
This product has multiple variants. The options may be chosen on the product page
US Models - These are designed for Undersink Sullage Pump Stations that require High Level Alarm Indication and/or require shut off solenoid. GRF - models - These are designed for Grundfos Sololift Units as per the above requirements Unique Pulse latching Solenoid requires a pulse to open and a pulse to close. Normal state is nonpowered.
This product has multiple variants. The options may be chosen on the product page
3 way (R3) & 5 way (R5) Brass Tees 25mm BSP standard size Designed for pressure pump/tank applications 5 Way Tee designed to take pressure switch & pressure gauge
4” and 6" Multistage submersible pressure pumps with built-in integrated electronics, designed to automatically start and stop the pump. Available in Single Phase only Grundfos and Davey brands also available
This product has multiple variants. The options may be chosen on the product page
The First Flush Diverter is designed to trap the leaves and debris from roofs & gutters When full the diverter is automatically closed and clean water is diverted into the storage tank
This product has multiple variants. The options may be chosen on the product page
The FJP Series offer a reliable range of horizontal self-priming jet pumps built with stainless steel components ideal for domestic and light commercial applications. These pumps are well-suited for tasks like household water supply, garden irrigation, and transferring clean water from tanks. Typically suited for suction lift situations (i.e. below ground tanks or water sources). Can handle suction lifts up…
This product has multiple variants. The options may be chosen on the product page
The FVP Series are medium-duty submersible pumps engineered for efficient handling of liquids containing soft solids and light slurries. Their compact design makes them ideal for installations in confined spaces where reliable solids-handling capability is essential.
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible grinder pumps Super grinding ability for grinding troublesome/foreign objects Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
This product has multiple variants. The options may be chosen on the product page
Layflat delivery hose Designed for water applications e.g. Irrigation, Water transfer etc Rolls up for easy handling & storage Designed for portable pump & similar applications Large range of sizes available from 25mm to 200mm Available in either light duty (blue) or heavy duty (red)
Compact, lightweight & reliable submersible pumps designed for general purpose drainage and wastewater applications Include compact fixed arm float switches for tight spaces. Available in Single Phase only.
This product has multiple variants. The options may be chosen on the product page
Stainless steel Pump Shackles Standard types either ‘D’ shackle (PS-D) or ‘Bow’ Shackle (PS-D) Designed to couple submersible pumps onto lifting chains in wet well situations Standard sizes 5mm and 6mm Large range of sizes available on request
Compact self-contained sanitary pump-out units for pumping of greywater only (not toilets) in domestic situations only Units are installed beside or under sanitary fixtures depending on site conditions in the same room
This product has multiple variants. The options may be chosen on the product page
Compact self-contained sanitary pump-out units for pumping of either raw sewage/greywater in domestic situations only Units are installed directly behind WC units - in the same room as the fixture Especially designed for tight spaces where holding tanks are not feasible
This product has multiple variants. The options may be chosen on the product page
Compact self-contained sanitary pump-out units for pumping of either raw sewage/greywater in domestic situations only Units are installed directly behind WC units - in the same room as the fixture Especially designed for tight spaces where holding tanks are not feasible
This product has multiple variants. The options may be chosen on the product page
Brass Full Flow Swing Check Valve for dirty water applications with small solids BSP Ends to suit all pipework types Fully accessible for removal of blockages or replacement of ports Robust brass construction Standard sizes from 15mm to 100mm
Smaller sized self contained above-ground wastewater pump out unit, for situations where gravity is not feasible. Units are usually installed below sink or basin unit to accept gravity waste pipe inlets NB: Separate carbon vent available if required, otherwise units require venting. Hunter valves are not suitable Tank size: 410mm L x 300mm W x 400mm H Tank capacity: 43 Litres
This product has multiple variants. The options may be chosen on the product page
The FMS Series comprises robust, horizontal multistage pumps engineered for high-pressure water delivery in both residential and commercial applications. Their stainless steel construction ensures durability and resistance to corrosion, making them suitable for various water supply tasks. Typically suited to flooded suction situations (i.e. above ground tanks or water sources)
This product has multiple variants. The options may be chosen on the product page
The FN Series is engineered for reliable wastewater handling in residential, commercial, and industrial applications. Built with rugged cast iron construction, non-clog impellers, and IP68-rated motors, these pumps deliver strong performance with solid passage capacity up to 50 mm. Designed for durability and efficiency, the FN Series ensures dependable drainage and sewage transfer with minimal maintenance.
This product has multiple variants. The options may be chosen on the product page
Non-perforated S/S hose clips to suit hose diameters from 6mm up to 140mm S/S 51 Hose Clamps to suit hose diameters from 79mm up to 240mm Designed for general/multi-purpose hose applications in conjunction with pumps & associated equipment
