The proven 900 Series MATelec Float Switch, which utilises an innovative, yet simple, fool proof switching concept, has greatly enhanced Float Switch reliability. The positive microswitching, eliminates the possibility of more than one circuit being in operation at any one time. The design innovation of the Switch is the ‘sliding detent action’ which obviates wave induced oscillation (common in mercury…
The proven 900 Series MATelec Float Switch, which utilises an innovative, yet simple, fool proof switching concept, has greatly enhanced Float Switch reliability. The positive microswitching, eliminates the possibility of more than one circuit being in operation at any one time. The design innovation of the Switch is the ‘sliding detent action’ which obviates wave induced oscillation (common in mercury…
Robust, heavy duty submersible contractor pumps for clean or dirty water applications Top discharge to suit construction sites Either manual or automatic models available (LC45) LC45 pump available in manual only
Select options
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible contractor pumps for clean or dirty water applications Top discharge to suit construction sites Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
Select options
This product has multiple variants. The options may be chosen on the product page
In-line hot water booster pumps designed to increase/ boost the pressure at showers and taps in domestic situations The pump is used in open systems and can be connected directly to the water main Grundfos, DAB, Wilo pump brands available
Select options
This product has multiple variants. The options may be chosen on the product page
Brass Spring Check Valves for clean water applications Brass Plunger Nitrile Rubber Seat Stainless steel Spring Max. working temperature 110°C Standard sizes from 10mm to 100mm
Full-flow ball check non-return valves designed for handling sewage & wastewater products Larger bore/full flow to eliminate blockages Available in BSP or Flanged configurations.
Select options
This product has multiple variants. The options may be chosen on the product page
Pump Station Control Panel incorporating pump overload and High Level Alarm Indication suited to pump station installations Standard Controller used in domestic pump stations (eg Mini/1000/1500/2000 models) Two options available - either standard or deluxe
Select options
This product has multiple variants. The options may be chosen on the product page
Compact, lightweight submersible pumps designed for solids handling applications, in tight spaces 2 pump options available Available in single phase only
Select options
This product has multiple variants. The options may be chosen on the product page
Robust powdercoated metal Housing/Enclosure Auto/off/manual switching Low voltage circuitry for input switches Contactor & thermal overload motor protection Available in Single & Three Phase options
Hard Wearing Plastic Housing/Enclosure Includes contactor, overload, start & stop push button Ideal Starter box for all pump types Available in Single & Three Phase options
The new FPC-300-Advanced Dual Pump Controller further enhances the “One controller does it all”concept, while at the same time, makes “simplicity of operation” even more user friendly. Although many unique features of the controller are common to all pumping applications, many “system specific” optional features, can be enabled or disabled at the flick of a switch
Select options
This product has multiple variants. The options may be chosen on the product page
A general purpose submersible drainage pump for clean & dirty water applications Either manual or automatic models available Available in Single Phase only.
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic single pump stations designed for pumping effluent & greywater for whole house situations in conjunction with septic tank systems E.g. Post Septic Tank - pumping to remote distribution/effluent fields Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
S/S Branded Flexible Hoses Designed for interconnection of pressure pump/tanks Available with straight ends or optional elbow one end Sizes from 25mm to 40mm Lengths from 300mm to 800mm
The Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water, Rain Water etc) tank is either empty or full. Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (Flashing LED & Flashing Strobe on Deluxe Model) and clean contacts (for connection of an auxiliary alarm). Designed to stand alone HL alarm…
The Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water, Rain Water etc) tank is either empty or full. Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (Flashing LED & Flashing Strobe on Deluxe Model) and clean contacts (for connection of an auxiliary alarm). Designed to stand alone HL alarm…
The Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water, Rain Water etc) tank is either empty or full. Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (Flashing LED & Flashing Strobe on Deluxe Model) and clean contacts (for connection of an auxiliary alarm). Designed to stand alone HL alarm…
The Liquid Level Alarms are designed to provide warning indication when storage (Effluent, Grey Water, Rain Water etc) tank is either empty or full. Warning indication is determined by a float switch. Warnings are; Audio (buzzer), Visual (Flashing LED & Flashing Strobe on Deluxe Model) and clean contacts (for connection of an auxiliary alarm). Designed to stand alone HL alarm…
The Fastflo GD Series are designed for the construction industry because they are lightweight, portable, and durable. The motor frame and mechanical seal bracket are made of aluminum alloy - this provides extra water cooling to the motor when water flows through. Features an all new design with exchangeable discharges, available in vertical as well as horizontal orientation - this…
Select options
This product has multiple variants. The options may be chosen on the product page
In-line hot water circulator pumps designed for the following applications:- • Hot Water Systems • Central home heating systems • Solar power systems and swimming pool systems Grundfos, DAB, Wilo pump brands available
Select options
This product has multiple variants. The options may be chosen on the product page
For safely connecting and carrying power through wet/damp enviroments or adverse weather conditions. The range available covers a multitude of domestic, commercial and industrial uses. Two versions available as follows (i) In-line joiner/connector (ii) In-line quick connect plug
Select options
This product has multiple variants. The options may be chosen on the product page
Low Voltage Pumps are designed for use where mains supply is not available Designed for transfer or boosting of liquids as required Flojet, and Shurflo brands available
Select options
This product has multiple variants. The options may be chosen on the product page
Booster Pump Packages c/w Sediment & U.V Filtration for Whole House and other applications. Option of Automatic Rain/Mains Control System if required. Fully Automatic Systems with Constant Flow & Run Dry Protection. Eg Press Control (Standard). VSD Pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
Range of PE Compression Fittings for Water & Air Applications Designed to suit metric MDPE pipe manufactured to NZS4130 Range – large range of fittings available: metric OD Series from 20mm OD up to 110mm OD
Select options
This product has multiple variants. The options may be chosen on the product page
CABLE Heavy duty submersible cable (neoprene) 3 core & 4 core types available from 1.5mm2 PLUGS Single & Three Phase IP67 plugs Suitable for all pump types where applicable
Horizontal Multi-stage non-self priming centrifugal pumps, designed for boosting household water supply Fully automatic operation Available in 3 sizes makes choosing the right pump for a reliable water supply easy
Select options
This product has multiple variants. The options may be chosen on the product page
Designed for pumping applications Standard Pressure Range up to 85 PSI Operates as normal but also turns off if pressure falls below 15 PSI Designed to protect pumps from running dry
Designed for pumping applications Standard Pressure Range 20 – 65 PSI Higher Pressure Options up to 350 PSI Fluid Temperatures 0 - 70°C ¼” BSP Female Fluid Connection 6 Bar & 12 Bar Options Single & 3 Phase Options
S/S Water Connection – Corrosion Resistant Controlled Action Diaphragm - longer life Brass air stem c/w sealing cap – longer life No regular air checks required Food Grade FDA Approved high grade Butyl Membrane Suitable for drinking water Max. working pressure 150 PSI/10 Bar Max. working temperature 90°C Horizontal (PTH) or Vertical (PTV) options Pressure Switches available also.
Stainless steel (PCSS) and Galvanized Pump Chain (PCGV) Standard Galvanized Chain sizes 6mm and 8mm Standard Stainless steel Chain sizes 4mm, 5mm, 6mm and 8mm Designed for coupling of submersible pumps in wet well situations Suitable for general purpose use as well
FPC-127 Series Designed to provide a continuous supply of water for a variety of uses, whilst prioritising and maximizing usage of rain water. RM Series Automatic Rain/Mains Control System c/w in-built pump all housed in custom PE Housing The unique electronic features make it the smartest unit available.
Select options
This product has multiple variants. The options may be chosen on the product page
Sediment In-line filters are for domestic, rural and commercial applications Designed to remove sediment and larger particles from water supply sources eg roof water, streams, etc. Provide protection for point of use filtration systems
Select options
This product has multiple variants. The options may be chosen on the product page
The new FPC-1500-Advanced Single Pump Controller further enhances the “One controller does it all” concept, while at the same time, makes “simplicity of operation” even more user friendly. Although many unique features of the controller are common to all pumping applications, a number of “system specific” optional features, can be enabled or disabled at the flick of a switch.
Select options
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible pumps for corrosive/ aggressive liquid applications Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic pump/sump stations designed for pumping stormwater and ground water in domestic situations with small surface areas There are 2 different pump types to suit different site conditions and applications General Purpose (GP) or Vortex (VX) pumps
Select options
This product has multiple variants. The options may be chosen on the product page
Flexible Suction & Delivery Hose Designed for water applications Will not kink flat - better water flow Designed for portable pump & similar applications Large range of sizes available from 19mm up to 200mm Available in General Purpose (green) or Oil Resistant (blue)
Filter housing and cartridges for domestic/rural and commercial applications Designed for point of use to remove impurities from water eg. kitchen sink (whole house units available as well) Types include sediment, taste and odour, etc All leading brands and types available
Select options
This product has multiple variants. The options may be chosen on the product page
In-Ground Vertical Pump Chambers are designed for sewage and stormwater applications in either retrofit, replacement or new tank installations NB: These tanks include flat base for pumps, but exclude the pumps, pipework and valves.
Select options
This product has multiple variants. The options may be chosen on the product page
US Models - These are designed for Undersink Sullage Pump Stations that require High Level Alarm Indication and/or require shut off solenoid. GRF - models - These are designed for Grundfos Sololift Units as per the above requirements Unique Pulse latching Solenoid requires a pulse to open and a pulse to close. Normal state is nonpowered.
Select options
This product has multiple variants. The options may be chosen on the product page
3 way (R3) & 5 way (R5) Brass Tees 25mm BSP standard size Designed for pressure pump/tank applications 5 Way Tee designed to take pressure switch & pressure gauge
4” and 6" Multistage submersible pressure pumps with built-in integrated electronics, designed to automatically start and stop the pump. Available in Single Phase only Grundfos and Davey brands also available
Select options
This product has multiple variants. The options may be chosen on the product page
The First Flush Diverter is designed to trap the leaves and debris from roofs & gutters When full the diverter is automatically closed and clean water is diverted into the storage tank
Select options
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible grinder pumps Super grinding ability for grinding troublesome/foreign objects Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
Select options
This product has multiple variants. The options may be chosen on the product page
Standard jet assisted centrifugal pump range designed for pressurising household water supply. 4 pump sizes available to suit different requirements Available as dual pump sets also
Select options
This product has multiple variants. The options may be chosen on the product page
Layflat delivery hose Designed for water applications e.g. Irrigation, Water transfer etc Rolls up for easy handling & storage Designed for portable pump & similar applications Large range of sizes available from 25mm to 200mm Available in either light duty (blue) or heavy duty (red)
Compact, lightweight & reliable submersible pumps designed for general purpose drainage and wastewater applications Include compact fixed arm float switches for tight spaces. Available in Single Phase only.
Select options
This product has multiple variants. The options may be chosen on the product page
Stainless steel Pump Shackles Standard types either ‘D’ shackle (PS-D) or ‘Bow’ Shackle (PS-D) Designed to couple submersible pumps onto lifting chains in wet well situations Standard sizes 5mm and 6mm Large range of sizes available on request
Compact self-contained sanitary pump-out units for pumping of greywater only (not toilets) in domestic situations only Units are installed beside or under sanitary fixtures depending on site conditions in the same room
Select options
This product has multiple variants. The options may be chosen on the product page
Compact self-contained sanitary pump-out units for pumping of either raw sewage/greywater in domestic situations only Units are installed directly behind WC units - in the same room as the fixture Especially designed for tight spaces where holding tanks are not feasible
Select options
This product has multiple variants. The options may be chosen on the product page
Compact self-contained sanitary pump-out units for pumping of either raw sewage/greywater in domestic situations only Units are installed directly behind WC units - in the same room as the fixture Especially designed for tight spaces where holding tanks are not feasible
Select options
This product has multiple variants. The options may be chosen on the product page
Brass Full Flow Swing Check Valve for dirty water applications with small solids BSP Ends to suit all pipework types Fully accessible for removal of blockages or replacement of ports Robust brass construction Standard sizes from 15mm to 100mm
Smaller sized self contained above-ground wastewater pump out unit, for situations where gravity is not feasible. Units are usually installed below sink or basin unit to accept gravity waste pipe inlets NB: Separate carbon vent available if required, otherwise units require venting. Hunter valves are not suitable Tank size: 410mm L x 300mm W x 400mm H Tank capacity: 43 Litres
Select options
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible vortex pumps for solids handling applications Manual or automatic models available (See specs) Single Phase available only
Select options
This product has multiple variants. The options may be chosen on the product page
Horizontal multistage centrifugal pumps designed for pressurizing household water supply – where higher pressures are required. Available in 3 sizes makes choosing the right pump for a reliable water supply easy Available as dual pump sets also
Select options
This product has multiple variants. The options may be chosen on the product page
4” and 6" Multistage submersible pressure pumps with built-in integrated electronics, designed to automatically start and stop the pump. Available in Single Phase only Grundfos and Davey brands also available
Select options
This product has multiple variants. The options may be chosen on the product page
Non-perforated S/S hose clips to suit hose diameters from 6mm up to 140mm S/S 51 Hose Clamps to suit hose diameters from 79mm up to 240mm Designed for general/multi-purpose hose applications in conjunction with pumps & associated equipment
Rubber compression seals, especially designed for fitting of pipework into polyethylene tanks and chambers Eg Pumping stations Unique lip ensures a high integrity seal Easy to Install – you only require the right size holesaw and drill Accommodates tank wall thickness up to 15mm Provides a flexible, water tight seal in tanks Standard sizes to suit pipe from 10mm up…
Robust, heavy duty submersible pumps for clean or dirty water applications Either manual or automatic models available (See specs) Single & Three phase options available (See specs)
Select options
This product has multiple variants. The options may be chosen on the product page
Robust, heavy duty submersible vortex pumps for solids handling applications Either manual or automatic models available (See specs) Single & Three Phase options available (See specs)
Select options
This product has multiple variants. The options may be chosen on the product page
6” Multistage submersible pressure pump with Float Switch for situations where high pressure is required For pumping of slightly dirty water/effluent Available in single phase only Davey and Grundfos brands available also
Select options
This product has multiple variants. The options may be chosen on the product page
PE Extension Riser (EXR) / Valve Box (VBX) designed for above or below ground applications The single riser fits the Mini, 1000, 1500 or 2000 Litre Pump Stations. The dual riser fits the 3000 and 4000 Litre pump stations Designed if extra depth required, or as a separate valve chamber
Select options
This product has multiple variants. The options may be chosen on the product page
Polyethylene vented pump cover Stainless steel Screws provided Universal – fits most pump types Versatile – easy to Install Provides shelter & protection for pump Available in range of different colours 2 sizes available:- Small 500 x 400 x 700 (PC) Large 850 x 570 x 800 (PCL)
PVC Full Flow Swing Check Valve for dirty water applications with small solids Glued socket ends for quick installation Available with spring or swing check valve Ideally suited to a wide range of applications Standard Sizes from 15mm to 150mm
Above-ground compact self-contained sanitary pumpout units for pumping of either raw sewage/greywater Units are either installed in recess/cavity or basement below the level of the fixtures Especially designed for tight spaces where holding tanks are not feasible Single or Dual pump options available in both single and three phase ABS, Grundfos, Sanimaster brands available Code 1000 Series Tank = 70 Litre Capacity 1002 Series…
Select options
This product has multiple variants. The options may be chosen on the product page
Medium sized self contained above-ground wastewater pump out unit, for situations where gravity is not feasible Units are usually installed below sink or basin unit to accept gravity waste pipe inlets NB: Separate carbon vent available if required, otherwise units require venting. Hunter valves are not suitable. Tank size: 510mm L x 410mm W x 475mm H Tank capacity: 90…
Select options
This product has multiple variants. The options may be chosen on the product page
PVC Double Union Full Flow Ball Valve Incorporates Safe Block design and includes fully adjustable removable seats Designed for water, effluent, and sewage applications Balls are made from PE – PTFE Technopolymer, EPDM O-Rings, PVC Valve Body Either BSP or Socket Ends Available Standard Sizes from 15mm to 100mm
Compact above-ground fully automatic single pump stations designed for pumping sewage and wastewater for smaller sanitary applications in situations where gravity discharge is not feasible There are 4 different pump types available to suit different site conditions & applications Dual pump options also available
Vent Odour Filters are designed to remove foul odours, noxious and corrosive gases from vent pipes (including hydrogen sulfide) They are designed to fit sewer vent pipes
Select options
This product has multiple variants. The options may be chosen on the product page
S/S Strainer c/w Male BSP Thread Designed to screw into BSP Female Non-Return Valves Designed for underwater fixed pipework applications e.g. Pressure Pumps Standard Sizes from 10mm up to 100mm
Robust Polyethylene Construction Valve Boxes (VB) or as complete Boundary Kits (BK) Designed to withstand light vehicle traffic loads U.V. Resistant, High Impact, HDPE Lid secured to body by galvanized chain c/w 316 s/s bolts Lids available in different colours Suitable as Boundary Kits for Sewer Pump/Pressure Systems c/w Isolating Valve, NRV and Tee Junction
Designed to float just below the water level to ensure you are drawing the cleanest water in your tank Includes PVC Ball float, flexible hose, suction strainer, and hose tail. Standard sizes are 25mm and 32mm
Galv Hose Tail c/w Male BSP Thread Designed to screw into BSP female Fittings e.g. Galvanised Steel Strainers (see above) Designed for portable pump or similar applications Standard sizes from 15mm up to 200mm
Galv Steel Strainer c/w Female BSP Thread Designed to screw into BSP Male Hose-tails etc (see below) Designed for portable pump or similar applications E.g. Civil/Construction Standard Sizes from 40mm up to 200mm
Compact above-ground fully automatic dual pump stations designed for pumping sewage and wastewater for smaller sanitary applications in situations where gravity discharge is not feasible There are 4 different pump types available to suit different site conditions & applications
Select options
This product has multiple variants. The options may be chosen on the product page
Spring loaded inline check valve Non-corrosive Materials Body in Glass Reinforced Nylon Spring in 316 Stainless steel Robust Design High Flow – designed for clean water Horizontal or Vertical Configuration Standard Sizes from 15mm to 50mm
Non-corrosive Materials – Glass Fibre Reinforced Nylon Male BSP Threads Designed to fit above spring check valve, or any other check valves Designed for Clean Water Applications Standard Sizes from 20mm to 50mm
Compact in-ground fully automatic single pump stations designed for pumping sewage and wastewater for smaller sanitary applications in situations where gravity discharge is not feasible There are 4 different pump types available to suit different site conditions & applications Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic single pump stations designed for pumping sewage & wastewater in whole house situations where gravity discharge is not feasible Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
Versatile Full Flow Ball Valve Lightweight & Strong Manufactured from non-corrosive, UV stabilized materials Potable water approved - AS/NZS 4020 Available in BSP, T NPT ACME Threads Removable Handle for security etc Positive ‘click’ smooth open/close action High Pressure 16 Bar Rated Standard Sizes from 15mm to 50mm
Large radius (swept) PVC Elbows Available in 45° and 90° Bends Designed to reduce friction losses in pumping discharge lines. Eg Sewage pump stations Standard Sizes 32mm up to 100mm
Compact in-ground fully automatic single pump stations designed for pumping sewage & wastewater in whole house situations where gravity discharge is not feasible Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
High performance, Cost Effective Check Valve Strong Compact Design Delivers high volumes of water quickly with unrestricted full flow Screw cap for easy access for in-line servicing No poppet valve to wear or jam Interchangeable diaphragm and spring with foot valve Standard sizes from 25mm to 63mm
Compact in-ground fully automatic single pump stations designed for pumping sewage & wastewater in whole house situations where gravity discharge is not feasible Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
High performance, Cost Effective Foot Valve Delivers high volumes of water quickly with unrestricted flow Efficiency in excess of 95% of many other valve types Unique design incorporates a self-cleansing diaphragm Operates via Pressure Differential at any angle or position No poppet valve to wear or jam Interchangeable diaphragm and spring with check valve Standard sizes from 25mm to 63mm
Compact in-ground fully automatic single pump stations designed for pumping sewage & wastewater from either single homes or entire communities via a pressure main to a centralized treatment plant or municipal wastewater collection network. Especially designed for hilly or low lying areas where gravity sewers would be expensive to install or for replacing aged septic tank systems, without major disruption…
Select options
This product has multiple variants. The options may be chosen on the product page
Economical, general purpose industrial solenoid valves c/w encapsulated coil Designed to isolate water supply in the event of power failure or product malfunction etc.
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic pump stations designed for pumping sewage and wastewater in commercial, industrial and residential situations where gravity discharge is not feasible - Designed for dual pump applications, where larger flows are required
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic pump stations designed for pumping sewage and wastewater in commercial, industrial and residential situations where gravity discharge is not feasible - Designed for dual pump applications, where larger flows are required
Select options
This product has multiple variants. The options may be chosen on the product page
Compact in-ground fully automatic single pump stations designed for pumping stormwater & groundwater in low lying areas where gravity discharge is not feasible There are 4 pump options, and 3 tank options available Dual pump options also available
Select options
This product has multiple variants. The options may be chosen on the product page
